PRODUCT SPECIFCIATIONS:
| WEIGHT |
475 Pound (lb.) |
| WIDTH |
25.38 Inches (in) |
| HEIGHT |
58.5 Inches (in) |
| COUNTRY OF ORIGIN |
USA |
| UPC OR BARCODE |
N/A |
| HAZARDOUS MATERIAL |
No |
| EPA CERT REQUIRED |
No |
| LENGTH |
30.625 Inches (in) |
| BRAND |
Comfort-Aire |
| EQUIPMENT TYPE |
Hydronic |
| TONNAGE |
6 |
| EER |
17 |
| REFRIGERANT |
R-410a |
| COOLING CAPACITY |
71700 |
| HEATING CAPACITY |
55800 |
| VOLTAGE |
208-230 VAC |
| PHASE |
Single |
| CYCLE/HERTZ |
60 |
| MINIMUM CIRCUIT AMPS |
48.5 |
| MAXIMUM FUSE SIZE |
70 |
| BLOWER MOTOR TYPE |
ECM |
| BLOWER MOTOR HP |
1 HP |
| RATED LOAD AMPS |
29.7 |
| LOCKED ROTOR AMPS |
179.2 |
| BLOWER WHEEL |
11" x 10" |
| COMPRESSOR |
Scroll |
________________________________________________________
Comfort-Aire's HT Series Commercial Water Source Heat Pumps:
These two stage models are among the most efficient heating and cooling systems available today, with EERs as high as 29.1 and COPS as high as 4.8.
Two stage models are available in the following configurations:
HTD -Vertical downflow/counterflow design
HTH - Horizontal design
The two-stage design allows the unit to run at 67% capacity most the time to maintain a consistent temperature and humidity level. When there's a demand for greater heating/cooling (such as during temperature extremes), the unit automatically and instantly changes to 100% capacity. This part load/full load capacity significantly lowers annual operating costs while increasing comfort.
- In addition to the full load/part load operation, a variable speed blower motor adds to comfort and efficiency with a Multitude of operational modes. The blower motor automatically adapts to all applications
- The two stage heat pump system uses environmentally friendly R-410A.
- A hot water generator with built-in pump and CuNi coil are standard features that add value and efficiency.
- The HT Series is available in 2 to 6 ton capacities.
Features:- Quiet Operation-Double isolation compressor mounting system and vibration isolation springs; insulated divider and separate compressor and air handler compartments
- Extended Operating Range-20° to 120° F makes unit suitable for virtually all applications and climates
- Two Stage Compressor-Copeland Multi-stage scroll compressor provides comfort at higher efficiencies than single stage models
- Microprocessor Controls-Includes performance monitoring system to signal a potential problem before a lockout occurs
- Durable Cabinet-G90 galvanized steel has a tough epoxy finish; drain pan is stainless steel; air coils are coated
- Easy Installation & Service-Service valves are included; three panels are easily removed, making it simple to access components
Currently no specifications available for this product. Please check product description or call our sales support team if you have any further queries.